include/esp32.h

@@ -2,4 +2,5 @@
 #define GPIO_GREEN 18
 #define GPIO_BLUE 16
 #define GPIO_COOLWHITE 15
-#define GPIO_WARMWHITE 19
+#define GPIO_WARMWHITE 19
+#define BOARD "ESP32"

include/esp32c3.h

@@ -1,5 +0,0 @@
-#define GPIO_RED 5
-#define GPIO_GREEN 6
-#define GPIO_BLUE 7
-#define GPIO_COOLWHITE 20
-#define GPIO_WARMWHITE 21

include/esp8266.h

@@ -2,4 +2,5 @@
 #define GPIO_GREEN 12
 #define GPIO_BLUE 15
 #define GPIO_COOLWHITE 4
-#define GPIO_WARMWHITE 5
+#define GPIO_WARMWHITE 5
+#define BOARD "ESP8266"

platformio.ini

@@ -10,17 +10,12 @@
 
 [platformio]
 ;default_envs = esp32doit-devkit-v1
-default_envs = esp32-c3-devkitm-1
 ;default_envs = nodemcuv2
-;default_envs = huzzah
+default_envs = huzzah
 
 [common]
 build_flags =
 	-D DEBUG=true
-	-D BOARD_ESP32_DEV=1
-	-D BOARD_ESP32_C3=2
-	-D BOARD_ESP8266_DEV=3
-	-D BOARD_ESP8266_HUZZAH=4
 lib_deps = 
 	tzapu/WiFiManager@^2.0.17
 
@@ -29,46 +24,26 @@ platform = espressif32
 board = esp32doit-devkit-v1
 framework = arduino
 monitor_speed = 115200
-;upload_protocol = espota
-;upload_port = 192.168.2.217
-upload_port = COM7
+upload_protocol = espota
+upload_port = 192.168.2.217
+;upload_port = COM7
 build_flags = 
-	-D JAJ_BOARD_TARGET=BOARD_ESP32_DEV
 	${common.build_flags}
 lib_deps = 
     ${common.lib_deps}
 lib_compat_mode = strict
 
-[env:esp32-c3-devkitm-1]
-platform = espressif32
-board = esp32-c3-devkitm-1
-framework = arduino
-monitor_speed = 115200
-;upload_protocol = espota
-;upload_port = 192.168.2.217
-upload_port = COM9
-board_build.flash_mode = dio
-build_flags = 
-	-D ARDUINO_USB_MODE=1
-	-D ARDUINO_USB_CDC_ON_BOOT=1
-	-D JAJ_BOARD_TARGET=BOARD_ESP32_C3
-	${common.build_flags}
-
-lib_deps = 
-    ${common.lib_deps}
-lib_compat_mode = strict
 
 [env:nodemcuv2]
 platform = https://github.com/platformio/platform-espressif8266.git
 board = nodemcuv2
 framework = arduino
 upload_protocol = espota
-upload_port = 192.168.2.242
+upload_port = 192.168.2.238
 ;upload_port = COM6
 upload_speed = 115200
 monitor_speed = 115200
 build_flags = 
-	-D JAJ_BOARD_TARGET=BOARD_ESP8266_DEV
 	${common.build_flags}
 lib_deps = 
     ${common.lib_deps}
@@ -82,7 +57,6 @@ upload_port = COM6
 upload_speed = 115200
 monitor_speed = 115200
 build_flags = 
-	-D JAJ_BOARD_TARGET=BOARD_ESP8266_HUZZAH
 	${common.build_flags}
 lib_deps = 
     ${common.lib_deps}

src/main.cpp

@@ -2,22 +2,10 @@
 #include <WiFiManager.h>
 #include <ArduinoOTA.h>
 #if defined(ARDUINO_ARCH_ESP32)
-  #if (JAJ_BOARD_TARGET == BOARD_ESP32_C3)
-    #include <esp32c3.h>
-    #define BOARD "ESP32C3"
-  #elif (JAJ_BOARD_TARGET == BOARD_ESP32_DEV)
-    #include <esp32.h>
-    #define BOARD "ESP32"
-  #endif
+  #include <esp32.h>
   #include <WiFi.h>
   #include <HTTPClient.h>
 #elif defined(ARDUINO_ARCH_ESP8266)
-  #if (JAJ_BOARD_TARGET == BOARD_ESP8266_HUZZAH)
-    #define BOARD "ESP8266-Huzzah"
-  #elif (JAJ_BOARD_TARGET == BOARD_ESP8266_DEV)
-    #define BOARD "ESP8266-DevKit"
-  #endif
-  #include <esp8266.h>
   #include <esp8266.h>
   #include <ESP8266WiFi.h>
   #include <ESP8266HTTPClient.h>
@@ -63,9 +51,6 @@ extern const uint8_t gamma8[];
 volatile bool blueInitState = false;
 volatile unsigned long blueToggleCount;
 
-// nextStatusMillis is global so we can reset it inside the process message function if needed
-unsigned long nextStatusMillis = 0;
-
 // Struct for storing color value sets
 // Colors are obvious. restDuration is how long to rest on this color.
 struct colorTriplet {
@@ -141,7 +126,7 @@ void inline blueBlinkISR(void) {
    #endif
 }
 
-void sendDeviceStatus() {
+unsigned long sendDeviceStatus() {
   if ( DEBUG ) Serial.println("Sending device status");
   WiFiClient client;
   HTTPClient http;
@@ -160,7 +145,7 @@ void sendDeviceStatus() {
     }
   }
   http.end();
-  nextStatusMillis = millis() + 600000; // 10 minutes
+  return millis();
 }
 
 // Set up our initial states and WiFi
@@ -205,7 +190,6 @@ void setup() {
    #endif
    analogWrite(GPIO_BLUE, 0);
    sendDeviceStatus();
-   nextStatusMillis = millis() + 600000; // 10 minutes
    ArduinoOTA.onStart([]() {
       analogWrite(GPIO_RED, 0);
       analogWrite(GPIO_GREEN, 0);
@@ -289,7 +273,7 @@ bool processMessage() {
    memcpy(&messageTargetID, (char*)buff + 13, 4);
 
    // If this packet isn't destined for ID=0 (all targets) or ID=TARGET_ID (our ID) then stop processing
-   if ( (myTargetID != 0 ) && (messageTargetID != 0) && ((messageTargetID & myTargetID) == 0) ) {
+   if ( (myTargetID != 0 ) && (messageTargetID != 0) && (messageTargetID != myTargetID) ) {
       if ( DEBUG ) Serial.println("Got packet for different ID! Mine=" + String(myTargetID) + " Target=" + String(messageTargetID));
       return false;
    }
@@ -413,7 +397,7 @@ bool processMessage() {
    if ( command == CMD_UPDATESTATUS ) {
       sendDeviceStatus();
       if ( DEBUG ) Serial.println("Status update requested");
-      return false;
+      return true;
    }
 
    return false;
@@ -426,6 +410,7 @@ void loop() {
    static short redLevel = 0, greenLevel = 0, blueLevel = 0;
    static bool newColor = false;
    unsigned long nowMillis = millis();
+   static unsigned long nextStatusMillis = millis() + 600000; // 10 minutes
    static unsigned long nextRampMillis;
    static unsigned long rampStartMillis;
    static unsigned long restingEndMillis;
@@ -446,7 +431,7 @@ void loop() {
    }
    
    if ( nowMillis >= nextStatusMillis ) {
-      sendDeviceStatus();
+      nextStatusMillis = sendDeviceStatus() + 600000; // 10 minutes
    }
 
    // Check to see if we have a new packet waiting and parse it out if we do